The Advantages of LNG Storage Tank

2017-07-24

Many customers consult us about the advantages of LNG tank, here we summarize the following points that LNG as the vehicle fuel.

1.The energy density is large, the vehicle continued mileage, the same volume of LNG car storage tank of natural gas is about 3 times than the CNG gas bottle. Large LNG trucks can be continuously aerated 800 ~ 1000km, very suitable for long-distance transportation needs.

2. The transportation is convenient, because it is liquid, LNG is convenient for economical and reliable long-distance transportation, and the construction of LNG automobile gas station is not restricted by the natural gas pipeline network.

3. Good emission performance, conducive to reduce pollution, protect the environment, LNG composition is more pure than CNG, and therefore LNG car emission performance is better than CNG car.

4. Good safety performance, LNG ignition point is 650 ℃, and LNG storage pressure is low (0.3-0.7MPa), more secure than CNG.

5.low speed, big torque and good economy
For heavy loads, heavy truck on the downhill condition (especially dump car, engineering) developed heavy truck version of gas engine, through the charging efficiency increase at low speed, improve the torque at low speed; reduce the fuel consumption rate.

6. Low temperature starting performance: minimum starting temperature - 30 degrees below zero.

The Advantages of LNG Storage Tank

Pre: Characteristics of Autoclave Aerated Concrete Products Back to list Next: Advantages of Autoclaved Aerated Concrete Block

Steam Boiler for AAC Plant

2018-09-20

AAC (Autoclaved Aerated Concrete)is 100% Green Building Material and has many advantages such as lighter quality, better heat preservation property and better sound absorption or insulation effect in comparison with common brick.

AAC Block Manufacture Process

2018-08-15

Autoclaved aerated concrete (AAC), also known as autoclaved cellular concrete, autoclaved lightweight concrete, Autoclaved Aerated Concrete (AAC) is a certified green building material and AAC blocks used for walls, floors, and roofs.

The Safety Precautions in Handling of Autoclave

2018-05-30

Industrial autoclaves are widely used in aerated concrete block, concrete pipe pile, high curing gypsum and other building materials, as well as rubber products, wood drying, preservative treatment and other production projects that require pressure steam curing.

Specification of Wood Anti-corrosion Autoclave

2018-02-01

ZBG has different specifications of wood corrosion autoclave (anti-corrosion tank), all-round, three-dimensional to meet the customer's various anti-corrosion needs.

What Factors Affect Autoclave Price

2017-11-01

Autoclave is a large and heavy weight pressure vessel. Widely used in aerated concrete block, concrete pipe piles, lime sand bricks, coal ash brick and other buildings in the autoclaved curing. Recently, a customer consulted the price of industrial autoclave.

Advantages of Autoclaved Aerated Concrete Block

2017-08-28

Autoclaved Aerated Concrete is a Lightweight, Load-bearing, High-insulating, Durable building product, which is produced in a wide range of sizes and strengths. AAC Blocks is lightweight and compare to the red bricks AAC blocks are three times lighter.

The Advantages of LNG Storage Tank

2017-07-24

The energy density is large, the vehicle continued mileage, the same volume of LNG car storage tank of natural gas is about 3 times than the CNG gas bottle. Large LNG trucks can be continuously aerated 800 ~ 1000km, very suitable for long-distance transportation needs.

Characteristics of Autoclave Aerated Concrete Products

2017-06-06

Autoclave aerated concrete (AAC) product have the advantages of light weight, good insulation properties, good sound-absorbing effect, and has a certain strength and processing advantages as a retaining structure filled with insulation material, is widely used in building, and widely accepted by all over the world , As many countries to promote and develop the preferred building materials.

Sand-lime Brick Plant

2017-05-09

Raw material preparationSand and lime is the main raw material of sand-lime brick production. The sand can be used like river sand, sea sand, Aeolian sand, dep

300000 Cubic Meter AAC Plant

2017-05-09

Capacity:300000cum AAC blocks/year Raw materials:Fly ash,Sand,Cement Fly ash AAC block is mainly composed of fly ash, cement, lime and gypsum raw material comp

Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.