A-level carbon rotary kiln waste heat boiler Manufacturers And Their Technical Parameters

2023-03-27

 A carbon company in Jinan built two 80-can 2700-can calcination furnaces. In order to recover the waste heat in the high-temperature flue gas generated by the carbon calcination furnaces, four waste heat boiler systems were planned to be used as spares for each other. The overheating occurred at 2.45Mpa and 410°C The steam is sent to a steam turbine to generate electricity.

carbon rotary kiln waste heat boiler Technical Parameters

The temperature of the waste flue gas discharged from the flue of the calciner can reach 1200°C. In order to reduce the energy consumption of the process and effectively use this part of waste heat, this waste heat recovery system is built. The high-temperature flue gas enters the steam waste heat boiler, and the main spans of the four sets of boilers are arranged relatively independently.

The steam output of the steam waste heat boiler is about 25t/h, and the superheat temperature is 410℃, which is used to provide steam to the steam turbine. The steam waste heat boiler is a single-pressure, modular, natural circulation tower-type waste heat boiler, equipped with an atmospheric thermal deaerator. Including the waste heat boiler body and supporting auxiliary equipment, at least including atmospheric deaerator, boiler feed water pump, phosphate dosing device, water spray desuperheater, soda sampling device, sewage expansion vessel, etc.

carbon rotary kiln waste heat boiler .jpg

carbon rotary kiln waste heat boiler 

A-level carbon rotary kiln waste heat boiler manufacturer

Zhengzhou Boiler Co., Ltd. (formerly: Zhengzhou Boiler Factory, abbreviated as: Zhengzhou Boiler). Started in 1945, it has a national A-level boiler manufacturing license and has made considerable achievements in the carbon industry. Some classic cases of waste heat boilers in the carbon industry:

  1. Suotong Yun Aluminum 98t/h Carbon Kiln Waste Heat Power Generation Boiler Project
  2. Four sets of 20 tons and 25 tons carbon rotary kiln waste heat recovery boiler project in Handan, Hebei
  3. Shandong Tianyang 3*15 tons/hour carbon waste heat flue gas recovery boiler project
  4. Liaoning Huojin 2*14t/h carbon waste heat boiler project
  5. Zhongke Vietnam 50 tons carbon kiln waste heat power generation project
  6. Kazakhstan 35t/h carbon rotary kiln waste heat boiler project
  7. Nanjing carbon rotary kiln waste heat boiler project
Henan, A-level, Waste Heat Boiler ,Manufacturer,carbon rotary kiln waste heat boiler

5t/h Waste Heat Boiler Used in Rotary Lime Kiln Production Line Project

2023-10-26

Type Selection and Technical Parameters of Guangdong 5t/h Low Temperature and Low Pressure Waste Heat Boiler1. Flue gas waste heat conditions of the project1)

12.8t/h Sintering Machine Waste Heat Boiler Project and Its Technical Parameters

2023-10-19

320m2 sintering area of ​​iron and steel plant with 12.8 tons sintering machine waste heat boiler project1. Meteorological conditions Average temperature

The Scope of Supply of the Whole Set of Cdq Waste Heat Boiler EquipmentThe Scope of Supply of the Wh

2023-10-09

The Scope of Supply of the Whole Set of Cdq Waste Heat Boiler EquipmentThe Scope of Supply of the Whole Set of Cdq Waste Heat Boiler Equipment

Waste heat boiler quality and life

2023-09-18

The waste heat boiler shall be designed and manufactured according to the corresponding indicators of national standards and current industry standards. The s

The basic requirements of the waste heat recovery boiler body in the actual project

2023-09-07

1 The waste heat recovery boiler is built-in and installed in the large flue, the flue gas passage of the device is well sealed, and the air leakage rate is

Flue gas flow rate 160000Nm³/h waste heat boiler parameters and supply list

2023-08-31

1. Waste heat boiler flue gas parameters: serial number project unit value 1

Q=32.4t/h waste incineration waste heat boiler P=6.5MPa T=450℃

2023-08-07

Q=32.4t/h waste incineration waste heat boiler P=6.5MPa T=450℃ device name Models and Specifications

7.7t/h And 15.4 Tph Waste Heat Steam Boiler Technical Parameters

2023-08-03

Q=7.7t/h waste heat steam boiler technical parameters1. Main technical parameters: Rated evaporation: Q=7.7t/h (calculated by the boiler factory) Superhe

Analysis Of The Market Prospect Of Waste Heat Boiler Manufacturers In 2023

2023-07-31

The waste heat boiler industry is an important part of China's power generation equipment manufacturing industry, undertaking the task of providing key techn

Understand The Model Parameters Of Waste Heat Boiler In 1 Minute

2023-06-08

The waste heat boiler product model consists of two parts. The first part indicates the afterburning situation of the waste heat boiler, the type, characteris

Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.


  • Heat Converters
  • Pressure Converters
  • Temperature Converters

Any question, please contact us for free. Phone number: +86-371-86167233 Whatsapp: +86 177 19888549 Email:[email protected]

KW
bar
    °C