12t/h Biomass Palm Oil Steam Boiler Quotation

12t/h Biomass Palm Oil Steam Boiler is a kind of oil-fired boiler, which can provide steam for various production and processing industries. The following is an introduction to the parameters and quotations of the 12t/h biomass palm oil steam boiler.

12T gas steam boiler technical parameters:

1. Model: WNS12
2. Rated evaporation: 12t/h
3. Rated steam pressure: 30bar
4. Rated steam temperature: 300℃
5. Heat transfer area: 308M3
6. Applicable fuel: light oil, heavy oil, gas, coal gas, etc.
7. Light fuel consumption: 730kg/h
8. Heavy fuel consumption: 707kg/h
9. Natural gas consumption: 798Nm3/h
10. City gas: 1848Nm3/h
11. Natural gas supply pressure: 150-300mbar
12. City gas supply pressure: 150-300mbar
13. Three-phase power for burning heavy oil: 58.4KW
14. Total electric power of light oil three-phase electric power: KW
15. Total gas power three-phase power: 32KW
16. Boiler maximum transport weight: 27.2T
17. Boiler full water volume: 22.8M3

12t/h Biomass Palm Oil Steam Boiler

The price of 12t/h Biomass Palm Oil Steam Boiler is mainly affected by the following factors:

1. The brand selection of boiler main body and auxiliary machine, the price of different brands is very different;

2. The selection of boiler materials, different materials have different prices;

3. Boilers with different structures have different prices. The 12t/h Biomass Palm Oil Steam Boiler has WNS type and SZS type, and the price is different for different types.

4. Due to the difference in design, quality and material selection of various manufacturers, the optional burners will also be very different, and the price of 12t/h Biomass Palm Oil Steam Boiler is also different.

Selection principle of 12t/h Biomass Palm Oil Steam Boiler:

1. Usually, horizontal gas boilers should be used. If the boiler room area is limited, vertical boilers can be used. The thermal efficiency of vertical boilers is lower than that of horizontal boilers.

2. If the steam pressure is required to exceed 1.6Mpa, a water tube boiler should be used.

3. According to the needs of the production process, considering the internal resistance loss of the pipe network and the boiler room, a certain margin should be reserved.