DHX Circulating Fluidized Bed Boiler

DHX series circulating fluidized bed boiler has single drum and vertical structure, which has absorbed the advantages of other boilers, effectively avoid problems such as boiler abrasion, coking and blocking of back feeding device, high density of boiler original dust emission, difficulty in slagging. This CFB boilers are used in chemical industry, heating industry, steel factories, textile factories.

DHX Circulating Fluidized Bed Boiler
  • CAPACITY

    20-400 t/ 14-280 MW

  • Pressure

    ≤9.81MPa

  • Fuel

    Coal, Biomass, Co-firing

  • Application

    Chemical Industry, Steel Industry, Heating Industry

DHX series boiler1.jpg

High combustion efficiency

a. Due to the intense mass and heat exchange in the fluidized bed, unburned coal particles can increase the residence time in the furnace by multiple cycles, which is very beneficial to the fuel burnout.

b. Bell-covered style air cap, has features like low resistance, anti-back ash flow, falling of preventing, guaranteeing the boiler combustion efficiency.

Low pollution emissions

DHX-type circulating fluidized bed boiler in the appropriate calcium and sulfur ratio and limestone particle size, can be up to 80% - 90% of the desulfurization rate. Meanwhile, due to the lower combustion temperature, the use of graded air, which make the type of boiler combustion generated nitrogen oxides are also much lower than the pulverized coal furnace, so their sulfur dioxide and nitrogen oxides emissions are low.

DHX series boiler1.jpg
DHX series boiler3.jpg

Parallel cyclone separator, good fuel separation

Furnace exit equipped with parallel high temperature cyclone separator makes the machine run stably and have a high rate of separation.

Long working life

Wear-resisting device is equipped in the both of water-cooling wall tube and smoke stack tube to guarantee the working life of the heating surface.

DHX series boiler4.jpg
DHX CFB Steam Boiler
Model Capacity Pressure
(MPa)
Steam Temperature
(℃)
feed water Temperature
(℃)
Fuel Factory mode
t/h BHP
DHX35-1.25-W 35 2681 1.25 194 105 Anthracite field assembly
DHX35-1.25/300-P 35 2681 1.25 300 104 Lean coal field assembly
DHX35-1.6-AII 35 2681 1.6 204 104 Bituminous coal field assembly
DHX35-2.5/400-AII 35 2681 2.5 400 104 Bituminous coal field assembly
DHX35-3.82-A 35 2681 3.82 249 104 Bituminous coal field assembly
DHX40-4.2-W 40 3064 4.2 254 104 Anthracite field assembly
DHX45-1.6-H 45 3447 1.6 204 104 Brown coal field assembly
DHX50-2.5-W 50 3830 2.5 226 104 Anthracite field assembly
DHX65-2.5/250-H 65 4979 2.5 250 104 Brown coal field assembly
DHX75-1.6-P 75 5745 1.6 204 104 Lean coal field assembly
DHX75-1.6/250-P 75 5745 1.6 250 104 Lean coal field assembly
DHX75-2.5/350-P 75 5745 2.5 350 104 Lean coal field assembly
DHX CFB hot water boiler
Model Capacity Pressure
(MPa)
Hot Water Temperature
(℃)
Return Water Temperature
(℃)
Fuel Factory mode
MW BHP
DHX58-1.6/150/90-AII 58 5916 1.6 150 90 Class II bituminous coal field assembly

Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.


Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.


HOW TO CONTACT

Chat Online

If you are interested in our products, please feel free to contact us now! Click and chat online.

chatOnline
  • Heat Converters
  • Pressure Converters
  • Temperature Converters

Any question, please contact us for free. Phone number: +86-371-86686767 Skype: zgboiler Email:zbgboiler@zzboiler.com

KW
bar
    °C